Galbreath Inside-Outside (IO) Rail Hoist

sku Product SKU:  Galbreath Inside-Outside (IO) Rail Hoist

Features

Ease of operation

• Centered cab-mount Power Tower
• Plug n’ Play wiring system
• Pintle ready rear aprons
• Standard inside air control

Safety

• Automatic front container spring-loaded locking system and rear container holddowns
• Heavy-duty safety props
• Fold-up ICC bumper
• Backup alarm and hoist up alarm with signal light on dash
• Optional hoist up speed-limiting parameters

Durability

• 3 micron filtration system with dual viscosity oil
• Two part epoxy primer and paint*
• Field tested heavy duty rear hinge
• Hoist frames are huck bolted to chassis
• Shock-absorbing sub-frame
• Oil reservoir is filter cart ready
• LED lighting
• Lifetime warranty on frame and two-year warranty on hydraulics

USD 0.0000

Self-Cleaning Stationary Overhead Suspended Electromagnets

sku Product SKU:  Self-Cleaning Stationary Overhead Suspended Electr

Overhead or Overband magnetic separators suspend above belt or vibratory conveyors, magnetically lifting ferrous metals out of bulk material. They are used for steel recovery; or protecting processing equipment, removing damaging tramp metal that can cause costly repairs and downtime.

Features:

• 10-YEAR WARRANTY against coil burnout
• No need for external expansion tank - oil expansion takes place internally
• Coil exceeds Class "H" insulation rating
• Heavy duty belt standard
• Class II direct drive motor
• Additional wear plate provides extra protection  for the magnet impact area

USD 0.0000

Lateral Camera

sku Product SKU:  654321

21/22 Amrep HX450 Front Loader with push out dump

sku Product SKU:  110

Amrep’s HX450FL front load refuse truck is available in multiple sizes and lengths, with full push-out or hoist ejection. Amrep's unique shaped construction, using Hardox® material, allows for a simple and clean design, providing greater strength and wear life.  

• Body Construction

  • Entire body shell: 
    1/8”, 4mm or 3/16“ Hardox 450
  • Hopper sides: 
    4mm or 3/16” Hardox 450
  • Rear door: 
    1/8” Hardox 450

• Lifting Mechanism

  • 14 - 18 Second cycle time
  • 1 - 8 cu yd capacity
  • Side pocket poks with dock loading capability
  • 8,000 lb lifting capacity
  • Replaceable bronze insert X-shaft bushings

• Packing System

  • High blade or low blade with follower (low blade with follower requires horizontal exhaust)
  • Selectable pack cycles
  • Follow plate to prevent spillage behind blade
  • Full eject or hoist to dump

• Electrical System

  • Computerized packing system
  • Packing function display
  • Harnessed wiring
  • Weather resistant quick connectors

• Body Construction 

  • Body shell - 1/8”, 4mm or 3/16“ Hardox 450

• Hopper Construction 

  • Lower sides - 4mm or 3/16” Hardox 450
  • Upper sides - 4mm Hardox 450

• Hydraulic Read Door

  • Hydraulic actuated single rear steel convex door
  • Door sheets - 1/8” Hardox 450

• Cab Canopy

  • Sides and top - 14 gauge mild steel

• Packer Follower (Low Blade Only)

  • Attached to top of packer blade to prevent refuse from collecting in front area of body
  • Follower cover - 10 gauge high tensile steel (low blade only)

• Packer Blade

  • Push type “A” frame box with shoes to slide In
  • Full length channel guides on body floor
  • Face - 1/4“ Hardox 450
  • Sides - 3/8” Mild Steel
  • Length - 30“
  • Width - 80”
  • Height - 60“ (high blade - 84”)
  • Guides - 6 x 15.3# channel full length of body
  • Wear guides - Hardox 500 wear plate

• Ladder

  • Right side of body to provide access to body roof with PTO lockout when in use

• Loading Mechanism

  • 8,000 lb capacity, rectangular tubing with flat bar straps and reinforcement gussets

• Forks, Cross Shaft & Bearings

  • Side pocket forks 6-1/2 x 1-1/4 x 51”
  • Cross shaft - cold drawn seamless tubing
  • Tubing - 3-1/2” O.D. x 1/2” wall 80,000 psi
  • (2) Bronze bushings grooved for lubrication
  • Bushing size - 4-1/2 x 3-1/2 x 2-1/2

• Arm Cross Shaft & Bearings

  • Cold drawn seamless tubing, bolt on mounting
  • 4-1/2” x 1/2” x 80,000 psi (3/4” & 1” optional)
  • Mounting - “U” bolt half cap wall mounted
  • (2) Full and (1) half bronze bushing grooved for lubrication
  • Full bushing - 6” O.D. x 4-1/2” I.D. x 6” long

• Deceleration Value

  • To allow maximum operating speeds without driver correction

• Container Stops

  • Rubber pads mounted inside forks at shaft

• Hoses and Fittings

  • HD double wire braided parker 100r2
  • SAE hose with jic fittings
  • Zinc dichromate seamless steel tubing

• Reservoir 

  • 60 Gallon capacity with breather cap shut off
  • Valve and tank drain plug
  • A 20-micron return line filter cartridge with a 20 psi bypass valve
  • Vertical baffles, 150-micron re-usable suction filter

• Controls

  • Air controls mounted in cab to the right and forward of operator and outside on the street side of the body

• Control Valve 

  • Commercial A-35 with built in relief valve

• Power Source

  • Front mount or transmission mounted gear pump

• Packer Cylinders

  • (2) Three stage telescopic, double acting, all chrome stages
  • 1st Stage (pack) - 6-1/2”I.D.
  • 2nd Stage (eject) - 5“ I.D.
  • 3rd Stage (eject) - 3-1/2” I.D.
  • Stroke - 162-3/4“

• Arm Cylinders 

  • (2) - Single stage, double acting bore - 4” stroke - 48-3/8“ rod - 2” chrome

• Fork Cylinders

  • (2) Single stage, double acting bore - 3“ stroke - 21” rod - 1-1/4“

• Rear Door Cylinders

  • (2) Single stage, double acting bore – 2-½” Stroke – 35” Rod – 1-1/4” chrome

• Hopper Cover Cylinder

  • (1) Single stage, double acting bore - 2” stroke - 93” rod - 1-1/4” chrome

• Hydraulic Oil 

  • Anti-wear, corrosion, oxidation and foam inhibitors
  • ISO viscosity grade - 46
  • API gravity - 31
  • Viscosity - 220 @ 100 Deg. F
  • Flash point - 430 Deg. F

• Lights

  • Standard ICC lights and reflectors conforming to California state vehicle code. “Truck-Lite” tail, stop, back up and directional lights

• Mid-Body Turn Signal 

  • Directional lights mounted at mid-point of body

• Rear Door Liquid Catch 

  • Steel construction installed under rear door to prevent liquid spill

• Clean Out Doors 

  • Two doors at front of body 10“ x 31” (low blade only)
  • Full access door on street side of body (high blade only)

• Steel Specifications 

  • Tensile strength - 180,000 psi
  • Tensile yield - 145,000
  • Brinell - 450

• Estimated Body Weight

  • 16,700 lbs (options may affect total body weight) lighter bodies available with material modifications

 

USD 0.0000

2023 MACK LR64 with 38 YD Amrep ASL Full Eject

sku Product SKU:  78987345

*stock photo*

Location-Johnson Creek WI

Condition-New

Year-2023

Make-Mack

Model-LR64

Color-White

Engine-Mack MP7

Horsepower-355

Transmission-Allison 4500RDS

Fuel Capacity-70 Gallon

Front Axle Rating-20,000

Front Suspension-Taperleaf

Rear Axle Rating-46,000

Rear Axle Ratio-5.04

Rear Suspension-Multi-Leaf

 

Amrep AMHASLTP021 Includes:

1.  Hydraulic Hopper Cover
2. Peterson 6 Light Strobe Package (4 Corners, 2 Mid Door)
3. 4 Eye Camera System
4. Tool Box, Steel Frame Mount 36"

USD 0.0000

Titan Transporter

sku Product SKU:  098765

Titan Features:

• Camera life keeps the camera centered in the pipe
• 360º turning radius for maximum agility
• Power forward and power reverse stainless steel sealed mechanical clutch with forward, reverse and freewheel neutral position
• Variable speed drive from zero to 60’ per minute in both forward and reverse
• Two electric motor drives, 1/4hp total, continuous duty rated, and waterproof housing
• Adjustable wheel axle length for large line stability – 19” or 24”
• Remote auto camera lift / Built-in lighting system: 300 watts with an auxiliary power box

USD 0.0000

Taurus Transporter

sku Product SKU:  8765

The Aries TR2000 and TR2120 Features:

• Maintenance-free drivetrain
• Weighted riser blocks for maximum traction and tractor clearance
• Optional camera lift keeps the camera centered in the pip
• Continuous duty, industrial-grade motor, and transmission
• Stainless steel construction
• Weighted balanced chassis assure long distance pulls from one entry point through multiple manhole runs

• Custom designed contoured rubber feet provide positive traction bite
• Carbon coated steel chains add strength and minimize chain stretch
• Proven transmission with forward/neutral/reverse capabilities for operator convenience and faster cable reel pullbacks
• Operates from any multi-conductor truck or portable system

USD 0.0000

TrailBlazer Mobile Enclosure

sku Product SKU:  99900

Smart Design, Rugged Construction

VoyagerTM HD Mainline Inspection Camera

sku Product SKU:  99999

Capture clear, detailed video of pipes relined 6″ to 48″ and larger with our innovative Voyager™ HD Mainline Inspection Camera. It is a compact HD 1080p x 1920p pan and tilt video camera with 120x zoom. Keep the lens clean without retrieving the camera from the pipe with Aries built-in lens wiper technology. Optional dual camera lasers ensure accurate crack measurement.

VoyagerTM HD Transporter

sku Product SKU:  90000

• Crawler fits pipes relined 6”– 48” and larger
• Standard motorized camera lift with internal gearing
• Digital CANbus controls for instantaneous crawler & camera response
• Autonomous time-saving functions such as auto-drive to waypoints & auto-retrieve
• Tool-less camera attach/detach with rugged connector
• Tool-less cable attach/detach
• Tough, reflective Kevlar lift strap with deployment loop
• HD backup camera

 

USD 0.0000

Mobile Pathfinder Solutions

sku Product SKU:  0990

Grouting System Truck

sku Product SKU:  9054

• 70-gallon grout mixing tanks allow more work time providing volume to mix a new batch of chemical while continuing to operate, increasing the capability to seal larger diameter pipe and lateral connections.
• Industrial stainless steel chemical mixers on each tank provide fast, efficient mixing operations.
• Consistent, optimal power is provided with ample size on-board power generators, air compressors and vacuum pumps.
• Equipment and control room areas can be set up for work in all weather conditions. Optional winter work doors, propane heaters and other climate-specific design features available.
• Meets equipment requirements of ASTM standard practices for chemical grouting of Mains (ASTM F: 2304-3), Laterals (ASTM: 2454-05) and Manholes (ASTM: F2412-04).

USD 0.0000

Laser Profiler

sku Product SKU:  21135

Laser Profiler delivers the details you need when conducting pipeline inspections. Integrates with Pipeline Assessment Certification Program software to provide immediate video results.

• Simple attachment to Aries Pathfinder or Badger tractors
• Detect and measure ovality, deflection, debris, and cavities.
• Joints, offsets and connections are also detected in existing, new, or relined pipe.
• Includes adjustable white LED lighting for standard video imaging.
• Controllable iris to adjust the image brightness.

USD 0.0000

Pathfinder Series

sku Product SKU:  66789

Mainline Camera

sku Product SKU:  67890

• 270° unobstructed viewing angle to view with-the-flow laterals and tractor wheels
• 360° camera head rotation for a full view of the pipe
• 120x zoom and high intensity LED light ring to see pipe details
• Self-cleaning lens system and field replaceable wipers for more time in the pipe

• SMARTEK internal diagnostics for monitoring camera conditions
• Adaptable to almost any multiconductor system
• Corrosion-resistant materials for long life in harsh pipe conditions
• Internally pressurized to verify seal and prevent leakage
• Scratch-proof and crack resistant sapphire lens window to withstand tough environments

USD 0.0000

BaleWulf 2 Ram

sku Product SKU:  00098

The BaleWulf Two Ram Balers have been designed with the user in mind. From the user-friendly touch screen menus, easy access maintenance features, to the customized commodity recipes. Available in two models, the 4560-2R (45” x 60” chamber) and the 7060-2R (70” x 60” chamber) that have the versatility to bale multiple commodities. Featuring an industry leading, 5 YEAR/ 10,000 HOUR chassis warranty, 2 YEAR/ 4,000 HOUR parts warranty, and a 2 YEAR/ 4,000 HOUR all-inclusive planned maintenance program.

 

Built with Sebright Products industry disrupting standards of quality and JWR’s world class service capabilities. The foundations of the BaleWulf Line of Balers are SAFETY, VERSATILITY, AND QUALITY without sacrificing performance.

Utilizing low HP and low operating PSI to achieve your target bale weights without putting undo stress on the baler. The BaleWulf Line of Balers are designed for long term operation with minimal maintenance

 

Clear Lexan Polycarbonate rear panels with an ultra-bright industrial LED work light comes standard on all BaleWulf models. With this feature users are able to perform a visual inspection without the need for lockout-tagout procedures. Utilizing light weight Lexan panels and a bright work light, provides a clear advantage in routine maintenance.

 

The ground-breaking feature of the BaleWulf Two Ram Baler is the industry first, Pack Shoe Adjusters. This innovative design allows the ram to keep tolerances tight and allows for more finite adjustments of the ram. No shimming or lifting of the ram necessary, saving you time and money.

 

Another innovative feature of the BaleWulf Two Ram Baler, is the Bolt in Liners. Minimal welding and torch cutting required, you can change out the frame floor and ram floor liners using sockets and wrenches. Which results in less down time for maintenance.

USD 0.0000

Bramidan B-series B4 Baler

sku Product SKU:  Bramidan B-series B4 Baler

Operating the B4 baler is simple and safe. The baler has a very low noise level, which minimizes disturbances to the work environment.  With 8,000 lbs. press force, a long stroke, and efficient retainer dogs inside of the chamber, the B4 allows you to reach a high compaction ratio.  The indicator light automatically flashes when a full bale is ready to be made, preventing the baler from overfilling. Simply eject the finished bale using the safe two-hand ejection system.

 

• Easy to connect
• Runs on single-phase power.
• Low noise level
• Easy to operate at retail locations.
• Operate from the front
• The B4 baler fits in areas with limited space.

USD 0.0000

Bramidan B-series B5 W Baler

sku Product SKU:  Bramidan B-series B5 W Baler

The B5 W is a stock room baler which has been constructed to service users with smaller amounts of waste, but who still need a machine to handle bulky materials. The machine is characterized by a wide filling opening of 40 inches, which is an advantage when handling larger cardboard boxes. The chamber is equipped with rows of efficient barbs, which keep the material back and ensure optimum filling.

 

Meets and exceeds ANSI Standards Z245.5 and OSHA Safety Standards. UL® & CUL® Approved Control Panel.

 

• Large filling opening
• Advantage when handling larger boxes
• Easy to replace strap rolls
• They are placed in front
• Automatic ejection
• Two-hand operation ejects the bale

USD 0.0000

Bramidan B-series B20 Baler

sku Product SKU:  Bramidan B-series B20 Baler

The B20 is a highly flexible machine and can be used in many different situations eg. retail shops, stores and different industries.  The chamber is provided with rows of barbs, which keep the waste material down, even very expandable materials like LDPE.  The B20 is easy to operate and the traditional construction ensures low maintenance costs. Meets and exceeds ANSI Standards Z245.5 and OSHA Safety Standards. UL® & CUL® Approved Control Panel.

                                                                                

• Easy to replace strap rolls
• They are placed in front
• Automatic ejection
• Safe 2-hand operation ejects the bale
• Noiseless
• Due to an unique hydraulic system

USD 0.0000

Bramidan B-series B6030 Baler *in stock*

sku Product SKU:  Bramidan B-series B6030 Baler

60" baler for large quantities of cardboard

The B6030 is a strong baler for high volumes of cardboard and shrink wrap. Efficient front and rear retainer dogs keep down the waste material.  The low profile construction makes the baler fit standing through an 8 foot dock door, and can be operated under an 11 foot ceiling. Equipped with a GSM system for complete monitoring of the baler and number of bales made.  All Bramidan machines meet ANSI Standards Z245.5 and OSHA Safety Standards; and are equipped with UL® & CUL® Approved Control Panels.

• Low profile baler
• B6030 can operate under an 11 foot ceiling
• Easy to operate
• Eject bale system is activated automatically
• High platen pressure
• The 66,200 lbs. of pressure ensures heavy bales

USD 0.0000

Bramidan B-series PC24 HD Galvanized

sku Product SKU:  Bramidan B-series PC24 HD Galvanized

Extraction of liquids

The PC24 HD is not only capable of baling your cans or plastic bottles, it will also capture any liquid residue in the collection reservoir at the bottom of the machine.  Aluminum cans and PET bottles: The PC24 HD will crush aluminum cans so densely, you do not need to tie off the bale to get it to stick together.

• Heavy duty machine
• Very dense bales
• Donation style door for easy loading
• Completely enclosed chamber with liquid reservoir
• Option for regular paint instead of galvanized
• Compliant with ANSI and UL standards

USD 0.0000

Bramidan X-series X10 HD Baler

sku Product SKU:  Bramidan X-series X10 HD Baler

The X10 HD is suitable for smaller retail shops, industrial companies or other companies, who need a compact baler with high capacity. The compact design makes it ideal where space is limited.  Equipped with cross cylinders, this machine offers superior press force but also a very low overall height. The X10 HD has a relatively large filling opening, making the daily operation as easy as possible.

Meets and exceeds ANSI Standards Z245.5 and OSHA Safety Standards. UL® & CUL® Approved Control Panel.

• Easy installation
• Very low overall height
• Safe and steady opening of door
• Operated by a strong threaded spindle
• Automatic ejection
• Two-hand operation ejects the bale.

USD 0.0000

Bramidan X-series X25 HD Baler

sku Product SKU:  Bramidan X-series X25 HD Baler

The X25 HD is equipped with cross cylinders, giving you stable compression and superior press force, together with a low overall height. Combined with a long stroke, a high bale weight can be achieved.  This baler is designed with easy servicing in mind, for example the positioning of the hydraulic unit mounted below the control panel on the side of the machine. The finished bale can be tied with polyethylene twine or steel wires.

Meets and exceeds ANSI Standards Z245.5 and OSHA Safety Standards. UL® & CUL® Approved Control Panel.

• Noiseless: Due to an unique hydraulic system
• Safe and steady opening of door
• Operated by a strong threaded spindle
• Easy installation
• Very low overall height

USD 0.0000

Bramidan X-series X30 HD Baler

sku Product SKU:  Bramidan X-series X30 HD Baler

The X30 HD is suitable for retail shops and industrial companies with large quantities of waste. It is a compact machine with high capacity and superior press force.  This baler has a wide filling opening for handling larger boxes, making the daily operation as easy as possible. The finished bale can be tied with polyethylene twine or steel wires.

Meets and exceeds ANSI Standards Z245.5 and OSHA Safety Standards. UL® & CUL® Approved Control Panel.

• Noiseless: Due to an unique hydraulic system
• Easy installation
• Very low overall height
• Safe and steady opening of door
• Operated by a strong threaded spindle

USD 0.0000