2021 Wastequip Body dump- WQ1101 *in stock*

sku Product SKU:  32150

USD 0.0000

2022 Wastequip 265XP-35 *in stock*

sku Product SKU:  33374

80% full - Advance warning light 

Controls on remote pendant in lieu of mounting in panel face on 15' cord. 

61 3/4'' Fold Down Hook on Compactor End 

61 3/4'' Fixed Hook-on Door end 

USD 0.0000

2022 Wastequip 265X-F *on order*

sku Product SKU:  34107

*picture coming soon*

USD 0.0000

HV Series

sku Product SKU:  100

MC Series

sku Product SKU:  101

• Debris Tank10 cu yd
• Water Tank1500 gallons
• Blower Hg16-27''
• Blower CFM3500-5900
• Boom26 ft reach from center
• Hose Reel800 ft of 1 in hose at 270 deg

• Jetter Pump GPM60-100 gpm
• Jetter Pump PSI2000 to 3000 psi
• HeightLess than 13 ft 6 in
• Width8 ft 4 in
• ChassisTandem Axle 6x4

The industry's leading performance is about doing all of the little things right. And as anyone whose been in this business long enough will tell you, the little things make all the difference. Together with our customers, we've created the perfect machine for catch basin cleaning, hydro excavating, and sewer cleaning. And we've done it in a way that means the lowest long-term cost of ownership. When it comes to long-term cost of ownership, size matters. But it's not the size of the tank that matters. It's the size of the flanges, the pivot pins, the hydraulic tanks, the lift cylinders. That's the specs they never sell you on– that make the difference between "on the job" or 'in the shop".  With GapVax, you can inspect your engine without starting it. Just unpin and rotate the hose reel, lift the hood, and you're ready to inspect. It's that easy. That means more convenience and safety for your operators. And because this kind of thoughtfulness extends well beyond the hood, mechanics love working on GapVax. Safety starts with the frame. GapVax puts it's unitized tank low to the ground and between the chassis frame to keep you from tipping. The hose reel is mounted on the same dual frame rails, which extend far beyond the engine to improve the strength of the reel, keep the operator away from the cab, and extend the life of the bearing. The boom is rotated by a worm gear instead of a hydraulic cylinder, and the boom is lifted by two cylinders to minimize stress and maximize strength.  The GapVax tube trays give you enough storage for 8 tubes at chest level. Say goodbye to reaching for racks and hoses. Say goodbye to twisted backs. In addition to our tube trays, we offer over 50 different types of toolboxes and tube storage, like our front bumper toolboxes with integrated nozzle racks. At GapVax, capacity isn't just about how many gallons. It's about how many years. That's why we build our tanks out of grade 304 stainless steel. It's why we've got four independent, field-adjustable, over-center locks, and a stainless steel vee-wire filter. So if something goes wrong, you don't stop running. And when we say we've got a 10 yard debris tank, we mean we've got a 10 usable yard debris tank.

USD 0.0000

VHE Series

sku Product SKU:  102

• Debris Tank12 cu yd
• Water Tank1000 gallons
• Blower Hg16-27''
• Blower CFM3500-4500
• Water Pump10 to 20 gpm @ 3000 to 4000 PSI

• Front-Mounted Boom26 ft reach from center
• Rear-Mounted Boom25 ft reach from center
• HeightLess than 13 ft 6 in
• Width8 ft 4 in
• ChassisTandem Axle 6x4

Known throughout the industry as building the longest-lasting and most user-friendly hydro excavators, we’ve taken our 30 years of industrial vacuum experience and created the most reliable and most budget conscious excavator in its class. The GapVax VHE combines the best of both worlds: A severe-duty base model, combined with a comprehensive list of optional equipment that gets you exactly what you need, without paying for things you don’t. The first thing you’ll notice is how similar our VHE and MC units appear. It’s not a coincidence. As the old saying goes, “If it aint broke, don’t fix it.” Basic features include: A full opening tailgate that provides unobstructed dumping and simple washout, A tailgate hinge and locks that are adjustable using two wrenches, An integral debris body and water tank that keeps the center of gravity lower to the ground, and ergonomic tool storage for easy access to regularly used items like vacuum tubes, hoses and water lances. We know you can’t stop working just because the thermometer drops. We also understand the expenses related to costly equipment freeze-ups. That’s why we offer you options that safely winterize your VHE. From heated pump and tool storage, glycol and air-out systems, the GapVax VHE won’t leave you out in the cold during the winter months. Working on and maintaining a GapVax is where we really stand apart from the rest. Everything is easily accessible and easy to maintain—the pump, the cleanouts, the grease points, and kunkle valves. Everything is built to be maintained at the lowest possible long-term cost. GapVax trucks are designed with the operator in mind. So everything is easily accessible and right where you need it. We try to go the extra mile to save backs and joints– because, at the end of the day, the only thing more important to your fleet than your vacuum truck is the person operating it. Let’s face it, the rules and regulations for safe excavating increase each year. Its tough to stay compliant without breaking the bank, but the GapVax VHE will help carry the load without burying your budget. And you’ll still receive all the benefits synonymous with a GapVax: operator friendly design, lowest cost to maintain, unmatched fleet uptime, and best-in-class performance.

USD 0.0000

VHX Series

sku Product SKU:  103

Our unique design makes GapVax different from all other equipment available, which is why our trucks last the longest, are the easiest to work on and have the highest resale value.

The VHX’s vacuum system, with wet/dry filtration, is quiet, reliable, and simple. Our superior filtration design includes ultra-efficient cyclone separators and long-lasting filter bags. You’ll dig confidently with the 13 GPM, 3,000 PSI water system, or the optional 200 CFM air compressor system. The full-tilting debris body provides quick unloading and simple cleanout, getting you in and out of the dumpsite fast. 

Outperform the competition and stay road legal with the best trucks in the business! The GapVax VHX is ready for anything! GapVax delivers optimum weight distribution for “Bridge Law” compliant states. The 15,000 lb. payload and low-profile (12’ 2”) make it the ideal combination for all-around hydro excavation projects. The GapVax VHX is ready for anything! 

Hydro or air excavation - whatever the task entails, this weight conscious hydrovac has your back! The optional vertical, heated cabinet that houses the water system, keeps you working in the harsh winters. The 200 CFM air compressor - optional - keeps you on the job when water is not available or not ideal for your situation. This versatile unit is the perfect addition to your fleet.

Equipped with a boom that is optimized for hydro excavation. The VHX boom has an 8” tube in tube with 22’ reach and a 15° downward pivot. The GapVax VHX is built for the operator, by the operator.

USD 0.0000

GJET Series

sku Product SKU:  104

When we built the GJET, we took everything that makes our combination truck great, and applied it to a more affordable, high-performance jetter truck. This truck has loads of features that put it at the top of its class from a stainless steel tank, to the smoothest water pump system with multi-flow and recirculation. We also added a ton of storage and useful controls.Simplicity and reliability are the hallmark of GapVax products, and the GJET is no exception. Our time-tested front-mounted hose reel gives you strength, simplicity, and a user-focused design that gets the job done, and just keeps running. Safety starts with the frame. The hose reel is mounted on dual frame rails which extends far beyond the engine to improve the strength of the reel, keep the operator away from the cab, and extend the life of the bearing. The baffles help to guard against tipping when driving with a full-load. The safety interlocks help prevent operator error. And the front-mounted location guards against traffic. Our salesmen and dealers work with you to figure out the perfect blend of storage vs water capacity, while taking axle weights into account. Our models range from 1,000 gallons to 3,000 gallons, with most customers choosing a 1,600 gallon, single axle configuration.

USD 0.0000

21/22 Amrep HX450 Front Loader with push out dump

sku Product SKU:  110

Amrep’s HX450FL front load refuse truck is available in multiple sizes and lengths, with full push-out or hoist ejection. Amrep's unique shaped construction, using Hardox® material, allows for a simple and clean design, providing greater strength and wear life.  

• Body Construction

  • Entire body shell: 
    1/8”, 4mm or 3/16“ Hardox 450
  • Hopper sides: 
    4mm or 3/16” Hardox 450
  • Rear door: 
    1/8” Hardox 450

• Lifting Mechanism

  • 14 - 18 Second cycle time
  • 1 - 8 cu yd capacity
  • Side pocket poks with dock loading capability
  • 8,000 lb lifting capacity
  • Replaceable bronze insert X-shaft bushings

• Packing System

  • High blade or low blade with follower (low blade with follower requires horizontal exhaust)
  • Selectable pack cycles
  • Follow plate to prevent spillage behind blade
  • Full eject or hoist to dump

• Electrical System

  • Computerized packing system
  • Packing function display
  • Harnessed wiring
  • Weather resistant quick connectors

• Body Construction 

  • Body shell - 1/8”, 4mm or 3/16“ Hardox 450

• Hopper Construction 

  • Lower sides - 4mm or 3/16” Hardox 450
  • Upper sides - 4mm Hardox 450

• Hydraulic Read Door

  • Hydraulic actuated single rear steel convex door
  • Door sheets - 1/8” Hardox 450

• Cab Canopy

  • Sides and top - 14 gauge mild steel

• Packer Follower (Low Blade Only)

  • Attached to top of packer blade to prevent refuse from collecting in front area of body
  • Follower cover - 10 gauge high tensile steel (low blade only)

• Packer Blade

  • Push type “A” frame box with shoes to slide In
  • Full length channel guides on body floor
  • Face - 1/4“ Hardox 450
  • Sides - 3/8” Mild Steel
  • Length - 30“
  • Width - 80”
  • Height - 60“ (high blade - 84”)
  • Guides - 6 x 15.3# channel full length of body
  • Wear guides - Hardox 500 wear plate

• Ladder

  • Right side of body to provide access to body roof with PTO lockout when in use

• Loading Mechanism

  • 8,000 lb capacity, rectangular tubing with flat bar straps and reinforcement gussets

• Forks, Cross Shaft & Bearings

  • Side pocket forks 6-1/2 x 1-1/4 x 51”
  • Cross shaft - cold drawn seamless tubing
  • Tubing - 3-1/2” O.D. x 1/2” wall 80,000 psi
  • (2) Bronze bushings grooved for lubrication
  • Bushing size - 4-1/2 x 3-1/2 x 2-1/2

• Arm Cross Shaft & Bearings

  • Cold drawn seamless tubing, bolt on mounting
  • 4-1/2” x 1/2” x 80,000 psi (3/4” & 1” optional)
  • Mounting - “U” bolt half cap wall mounted
  • (2) Full and (1) half bronze bushing grooved for lubrication
  • Full bushing - 6” O.D. x 4-1/2” I.D. x 6” long

• Deceleration Value

  • To allow maximum operating speeds without driver correction

• Container Stops

  • Rubber pads mounted inside forks at shaft

• Hoses and Fittings

  • HD double wire braided parker 100r2
  • SAE hose with jic fittings
  • Zinc dichromate seamless steel tubing

• Reservoir 

  • 60 Gallon capacity with breather cap shut off
  • Valve and tank drain plug
  • A 20-micron return line filter cartridge with a 20 psi bypass valve
  • Vertical baffles, 150-micron re-usable suction filter

• Controls

  • Air controls mounted in cab to the right and forward of operator and outside on the street side of the body

• Control Valve 

  • Commercial A-35 with built in relief valve

• Power Source

  • Front mount or transmission mounted gear pump

• Packer Cylinders

  • (2) Three stage telescopic, double acting, all chrome stages
  • 1st Stage (pack) - 6-1/2”I.D.
  • 2nd Stage (eject) - 5“ I.D.
  • 3rd Stage (eject) - 3-1/2” I.D.
  • Stroke - 162-3/4“

• Arm Cylinders 

  • (2) - Single stage, double acting bore - 4” stroke - 48-3/8“ rod - 2” chrome

• Fork Cylinders

  • (2) Single stage, double acting bore - 3“ stroke - 21” rod - 1-1/4“

• Rear Door Cylinders

  • (2) Single stage, double acting bore – 2-½” Stroke – 35” Rod – 1-1/4” chrome

• Hopper Cover Cylinder

  • (1) Single stage, double acting bore - 2” stroke - 93” rod - 1-1/4” chrome

• Hydraulic Oil 

  • Anti-wear, corrosion, oxidation and foam inhibitors
  • ISO viscosity grade - 46
  • API gravity - 31
  • Viscosity - 220 @ 100 Deg. F
  • Flash point - 430 Deg. F

• Lights

  • Standard ICC lights and reflectors conforming to California state vehicle code. “Truck-Lite” tail, stop, back up and directional lights

• Mid-Body Turn Signal 

  • Directional lights mounted at mid-point of body

• Rear Door Liquid Catch 

  • Steel construction installed under rear door to prevent liquid spill

• Clean Out Doors 

  • Two doors at front of body 10“ x 31” (low blade only)
  • Full access door on street side of body (high blade only)

• Steel Specifications 

  • Tensile strength - 180,000 psi
  • Tensile yield - 145,000
  • Brinell - 450

• Estimated Body Weight

  • 16,700 lbs (options may affect total body weight) lighter bodies available with material modifications

 

USD 0.0000

GALBREATH U4/U5-DPHK-176 Roll Off Hook Hoist

sku Product SKU:  32802

*Stock Photo*

Engine: DETROIT DD13 12.8L 470 HP @ 1625 RPM, 1900 GOV RPM, 1650 LB-FT @ 975 RPM 

Transmission: Allision 4500 RDS

Color: White

• Contoured Poly Tandem Fenders 
• Work lights - (2) - 4'' LED
• High Visibility Package- One (1) Beacon Light on Tarper Gantry (2) Work Lights on Tarper Grantry and (2) Strobe Lights in The Bumper 
• Adjustable hook heights via pull pin design (54” & 61 ¾”) 
• Toolbox
• Pioneer RP4500 Rack n' Pinion Tapping System
• Versatility for the user to lift containers (16'-20') of varying heights and weights

 

USD 0.0000

BaleWulf 2 Ram

sku Product SKU:  00098

The BaleWulf Two Ram Balers have been designed with the user in mind. From the user-friendly touch screen menus, easy access maintenance features, to the customized commodity recipes. Available in two models, the 4560-2R (45” x 60” chamber) and the 7060-2R (70” x 60” chamber) that have the versatility to bale multiple commodities. Featuring an industry leading, 5 YEAR/ 10,000 HOUR chassis warranty, 2 YEAR/ 4,000 HOUR parts warranty, and a 2 YEAR/ 4,000 HOUR all-inclusive planned maintenance program.

 

Built with Sebright Products industry disrupting standards of quality and JWR’s world class service capabilities. The foundations of the BaleWulf Line of Balers are SAFETY, VERSATILITY, AND QUALITY without sacrificing performance.

Utilizing low HP and low operating PSI to achieve your target bale weights without putting undo stress on the baler. The BaleWulf Line of Balers are designed for long term operation with minimal maintenance

 

Clear Lexan Polycarbonate rear panels with an ultra-bright industrial LED work light comes standard on all BaleWulf models. With this feature users are able to perform a visual inspection without the need for lockout-tagout procedures. Utilizing light weight Lexan panels and a bright work light, provides a clear advantage in routine maintenance.

 

The ground-breaking feature of the BaleWulf Two Ram Baler is the industry first, Pack Shoe Adjusters. This innovative design allows the ram to keep tolerances tight and allows for more finite adjustments of the ram. No shimming or lifting of the ram necessary, saving you time and money.

 

Another innovative feature of the BaleWulf Two Ram Baler, is the Bolt in Liners. Minimal welding and torch cutting required, you can change out the frame floor and ram floor liners using sockets and wrenches. Which results in less down time for maintenance.

USD 0.0000

TrailBlazer Mobile Enclosure

sku Product SKU:  99900

Smart Design, Rugged Construction

VoyagerTM HD Mainline Inspection Camera

sku Product SKU:  99999

Capture clear, detailed video of pipes relined 6″ to 48″ and larger with our innovative Voyager™ HD Mainline Inspection Camera. It is a compact HD 1080p x 1920p pan and tilt video camera with 120x zoom. Keep the lens clean without retrieving the camera from the pipe with Aries built-in lens wiper technology. Optional dual camera lasers ensure accurate crack measurement.

VoyagerTM HD Transporter

sku Product SKU:  90000

• Crawler fits pipes relined 6”– 48” and larger
• Standard motorized camera lift with internal gearing
• Digital CANbus controls for instantaneous crawler & camera response
• Autonomous time-saving functions such as auto-drive to waypoints & auto-retrieve
• Tool-less camera attach/detach with rugged connector
• Tool-less cable attach/detach
• Tough, reflective Kevlar lift strap with deployment loop
• HD backup camera

 

USD 0.0000

Mobile Pathfinder Solutions

sku Product SKU:  0990

Grouting System Truck

sku Product SKU:  9054

• 70-gallon grout mixing tanks allow more work time providing volume to mix a new batch of chemical while continuing to operate, increasing the capability to seal larger diameter pipe and lateral connections.
• Industrial stainless steel chemical mixers on each tank provide fast, efficient mixing operations.
• Consistent, optimal power is provided with ample size on-board power generators, air compressors and vacuum pumps.
• Equipment and control room areas can be set up for work in all weather conditions. Optional winter work doors, propane heaters and other climate-specific design features available.
• Meets equipment requirements of ASTM standard practices for chemical grouting of Mains (ASTM F: 2304-3), Laterals (ASTM: 2454-05) and Manholes (ASTM: F2412-04).

USD 0.0000

Laser Profiler

sku Product SKU:  21135

Laser Profiler delivers the details you need when conducting pipeline inspections. Integrates with Pipeline Assessment Certification Program software to provide immediate video results.

• Simple attachment to Aries Pathfinder or Badger tractors
• Detect and measure ovality, deflection, debris, and cavities.
• Joints, offsets and connections are also detected in existing, new, or relined pipe.
• Includes adjustable white LED lighting for standard video imaging.
• Controllable iris to adjust the image brightness.

USD 0.0000

Pathfinder Series

sku Product SKU:  66789

Mainline Camera

sku Product SKU:  67890

• 270° unobstructed viewing angle to view with-the-flow laterals and tractor wheels
• 360° camera head rotation for a full view of the pipe
• 120x zoom and high intensity LED light ring to see pipe details
• Self-cleaning lens system and field replaceable wipers for more time in the pipe

• SMARTEK internal diagnostics for monitoring camera conditions
• Adaptable to almost any multiconductor system
• Corrosion-resistant materials for long life in harsh pipe conditions
• Internally pressurized to verify seal and prevent leakage
• Scratch-proof and crack resistant sapphire lens window to withstand tough environments

USD 0.0000

Lateral Camera

sku Product SKU:  654321

Titan Transporter

sku Product SKU:  098765

Titan Features:

• Camera life keeps the camera centered in the pipe
• 360º turning radius for maximum agility
• Power forward and power reverse stainless steel sealed mechanical clutch with forward, reverse and freewheel neutral position
• Variable speed drive from zero to 60’ per minute in both forward and reverse
• Two electric motor drives, 1/4hp total, continuous duty rated, and waterproof housing
• Adjustable wheel axle length for large line stability – 19” or 24”
• Remote auto camera lift / Built-in lighting system: 300 watts with an auxiliary power box

USD 0.0000

Taurus Transporter

sku Product SKU:  8765

The Aries TR2000 and TR2120 Features:

• Maintenance-free drivetrain
• Weighted riser blocks for maximum traction and tractor clearance
• Optional camera lift keeps the camera centered in the pip
• Continuous duty, industrial-grade motor, and transmission
• Stainless steel construction
• Weighted balanced chassis assure long distance pulls from one entry point through multiple manhole runs

• Custom designed contoured rubber feet provide positive traction bite
• Carbon coated steel chains add strength and minimize chain stretch
• Proven transmission with forward/neutral/reverse capabilities for operator convenience and faster cable reel pullbacks
• Operates from any multi-conductor truck or portable system

USD 0.0000

2023 MACK LR64 with 38 YD Amrep ASL Full Eject

sku Product SKU:  78987345

*stock photo*

Location-Johnson Creek WI

Condition-New

Year-2023

Make-Mack

Model-LR64

Color-White

Engine-Mack MP7

Horsepower-355

Transmission-Allison 4500RDS

Fuel Capacity-70 Gallon

Front Axle Rating-20,000

Front Suspension-Taperleaf

Rear Axle Rating-46,000

Rear Axle Ratio-5.04

Rear Suspension-Multi-Leaf

 

Amrep AMHASLTP021 Includes:

1.  Hydraulic Hopper Cover
2. Peterson 6 Light Strobe Package (4 Corners, 2 Mid Door)
3. 4 Eye Camera System
4. Tool Box, Steel Frame Mount 36"

USD 0.0000

In Stock! 2022 Wastequip 2 YD 265X Stubby

sku Product SKU:  09876

Space saving design

• Only 66 3/4” in length for maximum space savings

Powerful and durable

• 1/2” floor plate and 1/2” ram bottom extend the life of the compactor
• 49,700 lbs. of force maximizes compaction

Easy to load

• Crossed cylinder design and extended rear feed allow unit to be loaded from a dock door

Ease of ownership

• Purchase, rental and leasing programs available

Warranty

• 3-1-1 warranty is a 3 year structural, 1 year parts and 1 year labor warranty
• Powered by the Guardian Control System featuring dual Watch Dog timers and an Automatic Maintenance Scheduler (AMS).

USD 0.0000